2 inch round led trailer tail lights

Types of 2-inch round LED trailer tail lights

2-inch round LED trailer tail lights are also known as trailer lights. They are the lights that are mounted on the back of a trailer to illuminate the rear of the trailer. They help in improving visibility and safety when driving in low-light conditions. These trailer lights come in different sizes, shapes, and colors. They also have different functions depending on the type. The most common types include:

• LED stop lights: LED stop lights help in signaling vehicles behind that the driver is about to make a stop or a turn. They light up in red color and have a longer life span than the traditional bulb lights.
• LED tail lights: Tail lights are usually used at night to help in signaling the shape and size of the vehicle. They are mostly red in color and are found on all vehicles. They help in preventing accidents by allowing visibility at night or during bad weather.
• LED turn signal lights: These lights help in signaling the drivers on the road the direction the vehicle is about to take. The bulbs light up and start flashing either on the right or left side, depending on the direction. They come in different colors depending on the region's laws.
• 2-inch round clearance lights: Clearance lights help inform drivers about the width and height of the trailer. They light up when the trailer is on the road. Different colors are used for different purposes. For instance, green lights are used to signal a go, and orange lights are used to show construction ahead.
• 2-inch round LED trailer light combos: LED trailer light combos are a combination of different lights such as tail lights, stop lights, and turn signal lights integrated into one unit. They help in saving space and are very useful for smaller trailers.

Specification & Maintenance of 2-inch round LED trailer tail lights

When shopping for 2-inch round LED trailer tail lights, the specs matter. Here's a breakdown of the most important specs to consider when purchasing these LED trailer lights.

• Voltage

  Most 2-inch round LED trailer tail lights operate on a 12-volt electrical system, which is standard for most trailers and vehicles. However, some options are available for trailers with 24-volt systems. These 24-volt systems offer brighter lighting and are more efficient.

• Brightness

  The brightness of trailer lights is measured in lumens. The higher the lumen count, the brighter the light. For 2-inch round LED trailer tail lights, the lumen range is between 200 and 800 lumens. This ensures visibility and safety, especially at night or in bad weather.

• Beam Angle

  The beam angle determines how the light spreads. A wider beam angle offers broader coverage, while a narrower angle focuses the light more. These trailer lights have a beam angle of 120 degrees, which is ideal for taillights.

• Wattage

  These trailer lights use less power, making them energy efficient. They use between 2 to 8 watts of power. The wattage varies depending on the brightness level and the number of LEDs in the light.

• LED Count

  As the name suggests, these are LED trailer lights. They use light-emitting diodes (LEDs) to produce light. The number of LEDs in the light affects its brightness and power consumption. Most 2-inch round LED trailer tail lights have between 4 to 16 LEDs.

• Color Temperature

  LED lights come in different colors. The color of the light produced is determined by the type of LED used. For trailer tail lights, a warmer color is ideal. The color temperature is between 2500 to 4000 Kelvin. The result is a red or amber color, which is standard for trailer tail lights.

• Lens Material

  The lens covers the LED lights and protects them from the environment. The material used for the lens affects its durability and visibility. Common materials include polycarbonate and acrylic. Polycarbonate is more durable but also more expensive.

• Mounting

  These trailer lights are typically mounted using screws. The mounting options are surface mount, flush mount, and grommet mount. The lights come with the necessary hardware for mounting.

• Waterproof Rating

  LED trailer tail lights are designed to be waterproof to prevent electrical damage and short circuits. These lights are rated IP67 or IP68. An IP67 rating means the lights are dust-proof and can be submerged in water for 30 minutes. An IP68 rating offers more protection against water and dust. The lights can be submerged in water for a long time.

• Warranty

  Some manufacturers offer a one-year warranty on 2-inch round LED trailer tail lights. The warranty covers defects in material and workmanship. Be sure to check the warranty before purchasing these trailer lights.

2-inch round LED trailer tail lights are low-maintenance. However, proper care is important to ensure the lights last a long time. Here are some maintenance tips for round LED trailer tail lights.

• 1. Regular Inspection

  Inspect the wiring and LED trailer tail lights regularly for any signs of damage. Ensure the lights are working properly. Check the lenses for any cracks or fading. Look for moisture inside the light housing, which could damage the wiring.

• 2. Cleanliness

  Keep the trailer lights clean. Use a soft cloth and mild soap to wipe the dust off the lights. Avoid using harsh chemicals or abrasive materials that could scratch the lens. Clean the lights at least once a week or after every long trip.

• 3. Check the Wiring

  Inspect the wiring for any loose connections. Ensure the wiring is properly connected. Look for any exposed wires that could cause a short circuit. Ensure the wiring is properly routed and not touching any sharp edges or hot surfaces.

• 4. Lubrication

  Apply a small amount of lubricant to the mounting screws and switches. Use a lubricant specifically designed for electrical components. This ensures the screws and switches work properly.

• 5. Seasonal Maintenance

  Before winter, prepare the trailer for winter storage. Disconnect the wiring harness and store the trailer lights in a dry place. This protects the lights from moisture and cold damage.

• 6. Replace When Necessary

  If the trailer lights are not working, try to fix them first. If the damage is beyond repair, replace the lights. Choose high-quality lights that are suitable for the trailer.

How to choose 2-inch round LED trailer tail lights

When it comes to choosing the right 2-inch round LED trailer tail lights, there are a number of factors that people need to consider. These factors include;

• Visibility and brightness

  Visibility and brightness are crucial when selecting trailer tail lights. The primary function of these lights is to ensure that trailers are seen on the road, even in low light conditions or bad weather. Opt for lights with high lumen output for superior visibility. This provides that the trailers are always visible, regardless of the driving conditions. Also, consider the beam pattern of the lights. A wide and even beam ensures that the trailer is visible from all angles, eliminating any blind spots.

• Durability and weather resistance

  Durability and weather resistance are important features to consider when selecting the 2-inch round LED trailer tail lights. These features ensure that the lights can withstand harsh conditions and last for a long time. Look for lights made from strong materials like aluminum housings. These lights are less likely to get damaged by rough handling or harsh weather. Additionally, consider the IP rating of the lights, which measures their resistance to dust and water. A higher IP rated light, like IP68, will offer superior protection against extreme weather conditions.

• Ease of installation

  Choosing trailer tail lights that are easy to install can save time and money. This is because they eliminate the need of hiring a professional to get them installed. Look for lights that come with clear instructions and all necessary mounting hardware. Also, consider lights with simple wiring connections, like plug-and-play systems. These systems reduce the time taken to install the lights and minimize the risk of wiring errors.

• Compatibility and power requirements

  When selecting the 2-inch LED trailer lights, it is crucial to consider the lights' compatibility and power requirements. Ensure that the lights are compatible with the electrical system of the trailer. This is important, especially for trailers with complex electrical systems. Additionally, consider the power requirements of the lights. Select energy-efficient lights, like those with LEDs. These lights consume less power from the trailer's electrical system, ensuring that the system functions efficiently.

• Style and design

  Style and design are key features to consider when selecting the 2-inch LED trailer lights. These features ensure that the lights match the trailer's aesthetics. Choose lights that complement the trailer's style, whether a sleek and modern look or a more traditional appearance. Additionally, consider the color and finish of the lights. Opt for lights with a durable and weather-resistant finish that can withstand harsh conditions.

How to DIY and Replace 2-inch Round LED Trailer Tail Lights

Replacing 2-inch round LED trailer tail lights is a straightforward process that can be done with basic tools. Here's a step-by-step guide on how to replace them:

Tools and Materials Needed:

• New 2-inch round LED trailer tail light
• Screwdriver (Phillips or flathead, depending on the screws)
• Wire connectors (if not included with the new lights)
• Electrical tape

Step-by-Step Guide:

• 1. Ensure Safety: Before starting the replacement, make sure the trailer is not connected to the vehicle and the lights are turned off to avoid any short circuits.
• 2. Remove the Old Light: Use a screwdriver to remove the screws holding the old light in place. Gently pull the light out of the housing.
• 3. Disconnect the Wires: Take note of how the wires are connected (usually one for running lights and one for brakes or turn signals). Disconnect the wires from the old light.
• 4. Connect the New Light: Connect the wires to the new LED light using wire connectors. Make sure to connect them in the same way they were on the old light.
• 5. Secure the New Light: Gently push the new light into the housing and secure it with screws.
• 6. Test the Lights: Before hitting the road, do a quick test to ensure the new lights are working correctly.

Q and A

Q1: How Are 2-Inch Round LED Trailer Tail Lights Wired?

A1: 2-inch round LED trailer tail lights are typically wired using a 2-wire or 3-wire system. The 2-wire system consists of a power wire connected to the positive terminal of the trailer's power supply and a ground wire connected to the negative terminal or the trailer's metal frame. The 3-wire system includes an additional signal wire for turn signals or brake lights, allowing for more complex lighting patterns. When wiring these lights, it's essential to use marine-grade wire and waterproof connectors to prevent corrosion and ensure reliable operation.

Q2: Can 2-inch Round LED Trailer Tail Lights Be Used on Any Type of Trailer?

A2: Yes, 2-inch round LED trailer tail lights can be used on any trailer, including boat trailers, utility trailers, and even campers. Their compact size makes them ideal for trailers that require lighting without taking up much space. Moreover, their durability and weather resistance features are particularly beneficial for boat trailers that are frequently exposed to water and harsh weather conditions.

Q3: Are 2-Inch Round LED Trailer Tail Lights Dimmer or Flicker?

A3: No, 2-inch round LED trailer tail lights do not dim or flicker under normal operating conditions. They are designed with high-quality LED chips that provide consistent and reliable illumination. If they do flicker or appear dimmer, it may be due to improper wiring, insufficient power supply, or moisture ingress. In such cases, it's essential to check the wiring connections, ensure the power supply is adequate, and inspect the lights for any signs of water damage.

Q4: Can These Lights Be Used for Off-Road Vehicles?

A4: Yes, 2-inch round LED trailer tail lights are suitable for off-road vehicles. Their rugged construction and brightness make them an excellent choice for off-road driving conditions. However, it's essential to check local regulations regarding the color and placement of tail lights, as they may vary from one region to another.

Q5: Are 2-inch Round LED Trailer Tail Lights Dimmable?

A5: Most 2-inch round LED trailer tail lights are not dimmable. However, some models come with built-in resistors or adjustable settings that allow users to control the brightness.